top of page
Enphase IQ7-60-2-US Microinverter 2021

Enphase IQ7-60-2-US Microinverter 2021

SKU: 030-07761-21
$140.00Price

Enphase, IQ 7 Micro Inverter, compatible with 60-cell PV modules (only), 208/240 volt, 250VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7-60-2-US

The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency.

Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring
and analysis software.

The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty.

Features

Easy to Install - Lightweight and simple. Faster installation with improved, lighter two-wire cabling.
Productive and Reliable - Optimized for high powered 60-cell modules. More than a million hours of testing. Class II double-insulated enclosure.
Smart Grid Ready - Complies with advanced grid support, voltage and frequency ride-through requirements. Remotely updates to respond to changing grid requirements. Configurable for varying grid profiles.
 

General Information     
Manufacturer:    Enphase Energy
Product Line: IQ7 Series
Model ID: IQ7-60-2-US
 

Mechanical Data
 
Technology:    Micro-Inverter
Dimensions:
8.34 x 6.89 x 1.19 Inches
Weight:    2.38 lbs
Connector Type:    MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter)
Cooling:    Natural convection - No Fans
Approved for Wet Locations:    Yes
Pollution Degree:    PD3
Enclosure:    Class II Double-Insulated
Environmental Category / UV Exposure Rating:    Outdoor - IP67
Communication:    Power Line Communication (PLC)
Monitoring:    Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy
Compliance (Pending):    AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2
Ambient Temperature Range:    -40°C to +65°C
Relative Humidity Range:    4% to 100% (Condensing)
 

Electrical Data
 
Input Data     
Commonly Used Module Pairings:    235W to 350W+
Module Compatibility:    60-Cell PV Modules
Maximum Input DC Voltage:    48 Volts
Peak Power Tracking Voltage:    27V-37 Volts
Operating Range:    16V-48 Volts
Min / Max Start Voltage:    22 V / 48 Volts
Max DC Short Circuit Current (Module Isc):    15 Amps
Overvoltage Class DC Port:    II
DC Port Backfeed Under Single Fault:    0 Amps
PV Array Configuration:    AC Side Protection Requires Max 20A per Branch Circuit
Output Data (AC)     
Peak Output Power:    250 VA
Maximum Continuous Output Power:    240 VA
Nominal Voltage / Range:    230V / 184-276V
Nominal Output Current:    1.04 Amps
Nominal Frequency:    50 Hz
Extended Frequency Range:    45-55 Hz
Maximum Units per 20 A (L-N) Branch Circuit:    16 (230 VAC)
Overvoltage Class AC Port:    III
AC Port Backfeed Current:    0 Amps
Power Factor Setting:    1.0
Power Factor (Adjustable):    0.7 Leading ... 0.7 Lagging
Efficiency:    96.5%

bottom of page