Home > Solar Equipment >

Enphase IQ8-60-2-US Microinverter 030-07784-ITC26
Enphase IQ8-60-2-US Microinverter 030-07784-ITC26


 
List Price: $186.00
Our Price: $169.00
Save $17.00!

Product Code: 030-07784-ITC26
Qty:

Description
 
nphase IQ 8 > 245 Watt MC4 Micro Inverter - IQ System
The IQ8 micro inverters from Enphase are designed to handle 235 to 350 watt solar panels. The IQ8 is compatible with 60-cell solar panels. 240 Split Phase ONLY

IQ8 Series Microinverters are UL Listed as PV Rapid Shut Down Equipment and conform with various regulations, when installed according to manufacturer’s instructions.

Model IQ8-60-2-US
Series IQ8
Manufacturer Enphase Energy

Mechanical
Type Grid Tie - Micro Inverter
Ambient Temperature Range -40°C to +65°C
Approved for wet locations Yes
Enclosure Class II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure rating NEMA Type 6 / outdoor
Cooling Natural Convection - No fans
Connectors MC4
Dimensions (W x H x D) 8.3" x 6.9" x 1.2"
Weight 2.38 lbs
Shipping Method Ground
Input (DC)
Commonly used module pairings:
Recommended PV Power (STC) 235 W - 350 W
Module compatibility 60-cell/120 half-cell
MPPT voltage range 27 – 37 V
Operating range 25 - 48 V
Min/max start voltage 30 V / 48 V
Max input DC voltage 50 V
Max DC short circuit current (module Isc) 15 A
Overvoltage class DC port II
DC port backfeed under single fault 0 A
PV array configuration 1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit
Output (AC)
Peak Output Power 245 VA
Maximum continuous output power 240 VA
Nominal (L-L) voltage/range˛ 240 V / 211-264 V
Maximum continuous output current 1 A @ 240 V
Nominal frequency 60 Hz
Extended frequency range 47 - 68 Hz
AC short circuit fault current over 3 cycles 5.8 Arms
Power factor at rated power 1.0
Maximum units per 20 A branch circuit 16 (240 VAC)
Overvoltage class AC port III
AC port backfeed current 30 mA
Power factor setting 1.0
Power factor (adjustable) 0.85 leading ... 0.85 lagging
Features
Easy to Install

Lightweight and compact with plug-n-play connectors
Power Line Communication (PLC) between components
Faster installation with simple two-wire cabling
High productivity and reliability

Produce power even when the grid is down
More than one million cumulative hours of testing
Class II double-insulated enclosure
Optimized for the latest high-powered PV modules
Grid-forming

Complies with the latest advanced grid support
Remote automatic updates for the latest grid requirements
Configurable to support a wide range of grid profiles
Meets CA Rule 21 (UL 1741-SA) requirements
Detailed Desription
Enphase's newest IQ8 Microinverters are the industry’s first grid-forming microinverters with split-phase power conversion capability to convert DC power to AC power efficiently. The brain of the semiconductor-based microinverter is a proprietary application-specific integrated circuit (ASIC) that enables the microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced 55nm technology with high speed digital logic and has super-fast response times to changing loads and grid events, alleviating constraints on battery sizing for home energy systems.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Solar Equipment
Solar Equipment > Inverters
Solar Equipment > Inverters > Enphase MicroInverters