Home > Solar Equipment >

Enphase IQ7A-72-2-US Microinverter, 030-07769
Enphase IQ7A-72-2-US Microinverter, 030-07769

List Price: $200.00
Our Price: $190.00
Save $10.00!

Product Code: 030-07769

Enphase IQ7A-72-2-US Microinverter, 030-07769

The high-powered smart grid-ready Enphase IQ 7A Micro™ dramatically simplifies the installation process while achieving the highest system efficiency for systems with 60-cell and 72-cell modules.

Part of the Enphase IQ System, the IQ 7A Micro integrates with the Enphase IQ Envoy, Enphase IQ Battery, and the Enphase Enlighten monitoring and analysis software.

The IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.


High Power

  • Peak output power 366 VA @ 240 VAC and 295 VA @ 208 VAC

Easy to Install

  • Lightweight and simple
  • Faster installation with improved, lighter two-wire cabling
  • Built-in rapid shutdown compliant (NEC 2014 & 2017)

Efficient and Reliable

  • Optimized for high powered 60-cell and 72-cell modules
  • Highest CEC efficiency of 97%
  • More than a million hours of testing
  • Class II double-insulated enclosure
  • UL listed

Smart Grid Ready

  • Complies with advanced grid support, voltage and frequency ride-through requirements
  • Envoy and Internet connection required
  • Configurable for varying grid profiles
  • Meets CA Rule 21 (UL 1741-SA)


TypeGrid Tie - Micro Inverter
Ambient Temperature Range-40°C to +65°C
Approved for wet locationsYes
EnclosureClass II double-insulated, corrosion resistant polymeric enclosure
Environmental category / UV exposure ratingNEMA Type 6 / outdoor
CoolingNatural Convection - No fans
ConnectorsMC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter)
Dimensions (W x H x D)8.35" x 6.89" x 1.19" (without bracket)
Weight2.38 lbs
Shipping MethodGround


Commonly used module pairings:
Recommended PV Power (STC)
295 W–460 W +
Module compatibility60-cell and 72-cell PV modules
Max Voltage58 V
Maximum input DC current10.2 A
Peak Power Tracking Voltage38 V - 43 V
Operating Range18 V - 58 V
Min/Max Start Voltage30 V / 58 V
Max DC short circuit current (module Isc)15 A
Overvoltage class DC portII
DC port backfeed under single fault0 A
PV array configuration1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit


Peak Output Power295 VA
Maximum continuous output power290 VA
Nominal (L-L) voltage/range˛240 V / 211-264 V
208 V / 183-229 V
Maximum continuous output current1.45 A @ 240 V
1.39 A @ 208 V
Nominal frequency60 Hz
Extended frequency range47 - 68 Hz
AC short circuit fault current over 3 cycles5.8 Arms
Power factor at rated power1.0
Maximum units per 20 A branch circuit11 (240 VAC)
11 (single-phase 208 VAC)
Overvoltage class AC portIII
AC port backfeed under single fault0 A
Power factor setting1.0
Power factor (adjustable)0.7 leading ... 0.7 lagging

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Solar Equipment
Solar Equipment > Inverters
Solar Equipment > Inverters > Enphase MicroInverters